On the wheeled lines in this catalogue, the wheel is a wear component. Zhejiang Jinbang Sports Equipment Co., Ltd. runs its own PU wheel line, whose workshop description covers wheel diameters from 20 mm to 250 mm. A PU wheel buyer — whether a brand specifying wheels for its own boards, a distributor stocking replacements, or an importer building a wheels wall — is dealing with the company that operates that line; which references that line supplies, and on what terms, are confirmed model by model in writing at quotation.
Specifying a wheel order
A wheel becomes precise with four decisions. Diameter, chosen from the 20 mm to 250 mm production span to match the product's ride height and purpose. Hardness, expressed as a durometer direction — the direction belongs in the enquiry, stated with the surface and the riding the wheel is being bought for, and settled on samples rather than asserted in the abstract. Core construction, specified explicitly rather than left to a default, above all on stunt and high-load applications. And colour and, for the flashing range, light-up construction — how a light-up wheel produces its effect is a fact of the individual construction, stated for that construction and confirmed model by model; whether a light-up construction is supplied from this line for a given order is confirmed in writing at quotation, not asserted from the line's general description. State those four as directions even if you cannot state them as numbers, and ask the factory to confirm, in writing, the sample specification it would quote against a stated rider profile and surface description.
Consistency between a sample and a later production run is a question a bulk buyer can put in writing for the programme, not an outcome to assume. Whether a difference between a sample and a later run would affect a given retail programme, and how any such difference would be recorded or handled, are items to state in the programme terms and confirm in writing at quotation. The buyer's control is documentary: a wheel specification confirmed in writing for the programme, and retained approved samples that give both sides a reference for every reorder. Agree that reference at first order.
Where these wheels go
An enquiry to this page can cover replacement and upgrade wheels for the kick scooter and stunt scooter ranges, skateboard wheels across the diameter span, and OEM wheel supply for brands building wheeled products of their own; for each application, the wheel specification and the line it is supplied from are confirmed in writing at quotation. Flashing wheels for the flashing roller line and light-up scooter variants are not listed as supply from this line: which wheel construction stands behind a light-up variant, and whether it is supplied from this line, are confirmed in writing at quotation. Buyers asking about wheels for longboards should note the position set out on the longboards page: longboards are not in the confirmed catalogue, and wheel supply for them follows the same written-confirmation route.
Ordering information
Wheel MOQ and lead time are confirmed per quotation, for the diameter, hardness and colour specification stated in the enquiry. Send your application, diameter and hardness direction and quantity pattern to [email protected] to request a quotation. For documentation supporting your market: Certificates available upon request.
Colour, branding and small details
Wheel colour is a specification item in its own right. Programmes can state wheel colours to match the decks and frames of the finished product, with the colourway for the exact wheel specification confirmed in writing and on samples. Small functional details deserve the same attention — bearing seats, spacer tolerances and surface finish belong in the written wheel specification. Whether a production run is checked against an approved sample is not a standing rule of this line: it is a programme term — raise it in the enquiry, agree it for the programme and record it in writing, rather than leaving it to assumption. Mention your service expectations in the brief; a wheel sold as a replacement part should be specified like one.
For buyers comparing wheel suppliers, ask one question that belongs in every programme file: whose line makes the wheel? Ask it of each supplier, record the answer in writing for the exact wheel specification you are buying, and hold reorders against that recorded answer — in a wear component, the documented supply route is part of the specification.
Label your wheel stock by diameter and hardness at goods-in, so the specification is recorded on the stock itself.
Send model references, your target market and branding requirements — MOQ and lead time are confirmed per quotation in writing.
Request a Quotation